### HIGHLIGHTS

- One of the original 25 homologation cars
- One of the 1st Gulf-Wyer 917s
- The 1st 917 to go a full race distance
- Drivers: Jo Siffert and Brian Redman


### OVERVIEW


**1969 Porsche 917K**
Chassis: 917 004

A special era in the history of the Porsche 917 stems from a private conversation held between Porsche team manager Rico Steinemann and the legendary John Wyer the night before the running of the 12 Hours of Sebring in 1969. Steinemann had been authorized by Porsche management to offer J.W. Automotive Engineering the Porsche factory racing program for 1970 and 1971. Now there were several reasons behind the invitation, foremost was the ability of the Slough based U.K. team to consistently win against newer cars backed by better funded teams. Case in point being that the Gulf Oil backed J.W.A.E. outfit was using what many considered an obsolete car in their Ford GT40 against current competition, and beating them. Wyer replied that he would take the matter up with Gulf Oil who were more circumspect as to what could be gained by joining Porsche. When the 917 was shown at the Geneva Salon a week earlier John Wyer had clearly seen the future of sports car racing. In Wyer's own words, "Porsche had, typically, done it first, and at a stroke every other car was out of date". In addition, he pointed out, in the direct Wyer manner, that he could offer no prospect that would be able to beat it.

All of this took place in April of 1969, and while there was a basic agreement and understanding between Wyer and Porsche, there was still a full season of racing ahead. The high points for both organizations were J.W.A.E. once again claiming the 24 Hours of Le Mans with their "obsolete" Gulf GT40, and Porsche winning the World Championship of Makes using a combination of 908s and early model 917s. The final contracts were signed in August.

The agreement called for Porsche to supply J.W.A.E. with seven complete 917s over the 1970 season. The first of those was chassis 917-004. 917-004 first raced in 1969 at the Nurburgring 1000KM in its original 917 bodywork. David Piper and co-driver Frank Gardner took 8th place, and thanks to this finish 004 would be the first 917 to finish a race in its entirety.

A proforma invoice dated December 5, 1969 confirms the offer of 004 to Wyer, with the actual delivery to Slough three days later. 917-009 was to later join 004 in January, while 013, 014 and 015 were prepared and collected from Porsche for shipping to Daytona. Chassis 917-016 was shipped to J.W.A.E. in March of 1970 with chassis 017 being held in reserve at Zuffenhausen with the possibility of being built up as a new car for Le Mans.

Serious preparation on 917-004 and 917-016 was well underway at Slough in March, with the upcoming 1000KM race at Brands Hatch to be held on April 12th. A letter from J.W.A.E., received at Porsche on April 2, 1970, requested a number of new parts to bring 004 up to date, which were promptly shipped out to Slough in time for the car to be ready to race. It was during this time that 004 was updated to the now iconic Kurzheck bodywork.

The BOAC 1000KM race at Brands Hatch featured the best of competitors, along with some of the worst of English weather in the form of wind and rain. Qualifying for 004 and 016 showed mixed results, but all that changed for the actual race. The driver pairings were Pedro Rodriguez and Leo Kinnunen in 016, and the great Jo Siffert and Brian Redman aboard 004. Both 917s started on narrower wheels with Firestone rain tires, and ran 4-speed transmissions. Rodriguez had a phenomenal race in the heavy English rain, and 016 went on to the overall victory. 004 had a troublesome start with Siffert suffering a flat left rear on the circuit and losing valuable time attempting to get back to the pits. He rejoined in third place and according to J.W.A.E. chief engineer, John Horsman, "the car had been alternating between second and third place and ready to win if Pedro faltered." However it all came to an end on lap 177. Brian Redman was at the wheel of 004 when he was hit from behind by Chris Amon's Ferrari 512S, effectively ending his race.

Upon returning to the J.W.A.E. workshops after the race, it was determined that although the damage to the chassis of 004 was not significant, due to the immediacy of the upcoming race schedule it would be advantageous to return the damaged chassis to Porsche and replace 004 with 017. This replacement chassis was picked up by J.W.A.E. from Zuffenhausen on April 26, 1970 and delivered to the workshops at Slough for immediate assembly.

In order to maintain the validity of the Carnet (an international customs document) that had been issued for 917-004, the chassis tag from 004 was removed and welded on the replacement chassis 017. This way it would appear that 004 continued in service. The damaged 004, now with the badge of 017, was returned to Porsche and eventually repaired later that fall.

In 1975, Porsche sold 004, now badged as 017, to Alan Hamilton of Hamiltons of Australia, the official importer of Porsche vehicles for the land down under. The man was not only a racer but also a collector of Porsche racecars, having owned several 908s, and having purchased 917/30-004 directly from the factory. The purchase of an original 917K was almost an afterthought.

In 2004, the car was being offered by Fiskens of Kensington, and a deal was made by principal Gregor Fisken with Stephane Ratel of the SRO Motorsports Group. Ratel has impeccable credentials having been one of the founders of the BPR Series, which later became the FIA GT Championship. Ratel had his friend and former partner in the BPR, Jurgen Barth, visit Fiskens and inspect 017 prior to purchase. Ratel had planned to run the 917 in historic events but simply did not have the time to participate, and the car then found its way to Miguel Amaral of Portugal. Amaral had his own impressive stable of current and vintage race cars, and raced 017 on the great circuits of Europe on numerous occasions.

In 2008, Amaral decided to send the car to California for restoration under the guidance of noted Porsche historian Kerry Morse. The car was delivered to Porsche Motorsport North America for disassembly of the drivetrain and electrics. Unfortunately the project suffered a series of delays and setbacks, not an unusual occurrence with a difficult, high-end restoration.

In 2011, at Rennsport IV, the subject of 017 came up between Kerry Morse and Bruce Canepa. Having pursued this specific 917 in the past, and still interested in purchasing it, Canepa and Morse worked out a deal.

In December of 2011, 017 was delivered to the Canepa facility in Scotts Valley. Canepa's goal was to restore the car to its Gulf liveried, Brands Hatch configuration. Once the scope of the project was fully understood it was decided to bring together a team of the finest experts to complete the car. Normally all the work would have been executed in-house at Canepa, but with a dozen high level restorations already underway, including another 917, Bruce decided to send the body and chassis of 017 to Kevin Jeannette of Gunnar Racing in West Palm Beach, Florida. Gunnar, like Canepa, is well known for their extensive and thorough restorations of Porsche competition vehicles. Having owned and raced one of Gunnar's 917 restorations Bruce knew that they had the experience, expertise and quality that would meet his standards for a world-class restoration.

While the craftsmen at Gunnar began the two year process of completely restoring every aspect of the 917 body and chassis. The 4.5 liter flat twelve cylinder was rebuilt and increased to 5.0 liters, the most potent of 917K engine specifications, which was typical of all 917 engines in period. A new crankshaft had to be manufactured to accomplish the build, and Canepa gave this task to the craftsmen at Crosthwaite & Gardner in England who are renown for their precision machine work on vintage racecars. Finally having sourced a new set of 5.0 Mahle pistons and cylinders the intricate engine build was complete. The rare Type 920 four-speed gearbox was entrusted to Dieter Inzenhofer of Andial fame for a complete rebuild.

The Canepa project team spent long hours making sure all the elements going into 017 were absolutely correct. Working with a cadre of specialty parts suppliers, and using up plenty of favors, part by part the 917 came together. For example the headlights, NOS and still in their Porsche boxes, came from Kevin Jeanette's personal parts stash. Kerry Morse assisted the build, contributing his vast knowledge, and access to his sizable period parts collection. From the smallest bolt, to the intricate aluminum chassis, every element of the 917 was scrutinized and vetted. **The goal was to execute the most accurate restoration of a 917 to date, and thanks to the hard work of multiple teams of experts that goal has been accomplished.**

This particular chassis occupies a special place in Porsche history: 017 (then 004) began life as one of the original cars for homologation in April of 1969; It is one of the few examples to be raced in 1969; and it is the first 917 to go the distance and finish a race in its entirety. Even with that stellar pedigree, it really comes down to the fact that 017 was, and is, a J.W. Automotive Engineering / Gulf 917K. That iconic livery on a 917 even to the uninitiated represents the pinnacle of the 917K's road racing efforts. 917s are truly rare beasts, and it is even rarer for one to come up for sale, especially one that can irrefutably wear the soul-stirring Gulf colors of blue and orange.


### Race history of 917-004 (prior to chassis number 017)
1969
April FIA (CSI) Homologation and registration
May Preparation for the Nurburgring 1000KM
June Nurburgring 1000KM
Drivers: Frank Gardner and David Piper
Result 8th overall. This was the second race for a 917, however,
as the first race for the new car was at Spa where the car had
mechanical failure on the first lap, 004 is considered the first 917
to go the distance and finish a race in its entirety.
June Stability testing at Hockenheim
Driver: Herbert Linge
November Conversion to full 917K bodywork
December Preparation and delivery to J.W. Automotive Engineering

1970
March Preparation for BOAC 1000 KM race at Brands Hatch
April BOAC 1000KM race at Brands Hatch
Drivers: Jo Siffert and Brian Redman
Result: DNF
April Original chassis 917-004 returned to Porsche to be repaired and
renumbered as chassis 017

### Technical Specifications:
Porsche 917 004

Motor: Type 912/11
5.0 Liter (4998cc) twelve cylinder air-cooled
Bore & Stroke 86.8 x 70.4
10.5 compression ratio
630 HP @ 8300 rpm
Torque 434 ft.lbs @ 6500 rpm
Bosch fuel injection

Transmission: Type 920 four-speed with reverse
Chassis: Aluminum tube construction 1.6mm wall thickness
Body: Fiberglass reinforced resin
Wheelbase: 90.5 inches / 2300mm
Front wheels: 10.5" x 15" magnesium (9" x 15" rain)
Rear wheels: 17" x 15" magnesium (12" x 15" or 15" x 15" rain)
Front track: 1582mm or 1620mm depending on wheel width
Rear track: 1533mm or 1584mm depending on wheel width
Overall length: 162 inches / 4120mm
Width: 78 inches / 1980mm
Height: 37 inches / 940mm
Weight: (without fuel) 1764 lbs / 800 kgs